We carry Woodward synchronizer and load share controllers for independent control of load share and synchronization. We provide new synchronizer and load share controllers and retrofit controls for older systems.
We carry the following synchronizer and load share controllers:
The Woodward DSLC-2 is a microprocessor-based synchronizer and load control designed for use on three-phase AC generators. The DSLC-2 combines synchronizer, load sensor, load control, dead bus closing system, VAR, power factor and process control, all in one powerful package. Applications allow up to 32 generators to be precisely paralleled and controlled. A dedicated Ethernet system provides seamless communications between DSLC-2 and MSLC-2 units.
The Woodward MSLC-2 is a microprocessor based load control designed for three-phase electric power generation sites equipped with our DSLC-2.
The MSLC-2 is a synchronizer, a utility load sensor, an import/export load level control, a power factor control, and a master process control. Applications include power systems which operate in parallel with single- or multiple-utility feeds, as well as new capabilities for multiple segment and intertie breaker control.
The LS-5 Series are synchronizer and load share controllers with integrated protective functions. They are designed to enable complex power management applications with multiple incoming mains and bus breakers in combination with easYgen-3400/3500 equipped genset controllers.
Woodward’s SPM-A speed and phase matching synchronizer provides automatic frequency and phase matching when used with 2301, 2301A, and EPG (Electrically Powered Governor) electric load sharing control systems.
The SPM-D10 Series are microprocessor-based synchronizers designed for use on three-phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators. The SPM-D10 Series synchronizers provide automatic frequency, phase, and voltage matching, using either analog or discrete output bias signals.
The SPM-D11 Series are microprocessor-based synchronizers designed for use on one- or three-phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators. The SPM-D11 Series synchronizers provide automatic frequency, phase, and voltage matching, using either analog or discrete output bias signals. It combines synchronizing for one circuit breaker, load and power factor control, or isochronous load sharing and generator protection.
The SPM-D21 Series consists of microprocessor-based synchronizers designed for use on three-phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators. The SPM-D21 Series provides automatic frequency, phase and voltage matching using either analog or discrete output signals. It combines synchronizing for a GCB (generator circuit breaker) and a MCB (mains circuit breaker), load and power factor control, and generator and mains protection.